Exchange Table Laser Cutting Machine for Safer, Faster, and Continuous Sheet Metal Production
HALDEN exchange table laser cutting machine is designed for high-efficiency sheet metal production. With a high-low dual exchange worktable, one table can cut while the other table is used for loading and unloading. The full enclosure design improves operator safety by containing the cutting process, laser radiation, sparks, fumes, and flying debris.
Loading and Unloading Time Can Become the Biggest Bottleneck in Sheet Metal Laser Cutting.
A dual exchange table allows cutting and material handling to happen in parallel, helping reduce waiting time and improve daily output.
Key Information Needed Before Selecting an Exchange Table Laser Cutting Machine
To recommend the right model, HALDEN needs to know your sheet size, material type, thickness range, target cutting speed, laser power preference, loading method, production volume, workshop space, voltage, dust extraction requirement, and whether full enclosure, automatic loading, or bus control integration is required.
Sheet Size
Standard models cover 1500×3000mm, 2000×4000mm, 2000×6000mm, 2500×6000mm, 2500×8000mm, and 2500×12000mm.
Laser Power
Available power range is 1500W–30000W. Selection depends on material, thickness, edge quality, and production speed.
Production Mode
Dual exchange tables are suitable for continuous production where loading and unloading should not stop the cutting cycle.
Safety Requirement
Full enclosure helps protect operators from laser radiation, sparks, fumes, and debris during cutting.
What Is an Exchange Table Laser Cutting Machine?
An exchange table laser cutting machine is a fiber laser cutting system with two worktables. While one table is inside the cutting area, the other table is outside for loading raw sheets or unloading finished parts. This high-low exchange platform reduces idle time and improves production efficiency for sheet metal fabrication.
Dual Exchange Platform
One table cuts while the other table loads or unloads, reducing downtime and supporting continuous production.
Full Enclosure Design
The enclosed cutting area helps contain laser radiation, sparks, cutting fumes, and flying debris for a safer workshop.
High-Speed Fiber Laser Cutting
With max running speed up to 140m/min and max acceleration up to 1.5G, the system supports high-output sheet metal cutting.
Key Benefits of HALDEN Exchange Table Laser Cutting Machine
The original page highlights continuous operation, enhanced safety, efficiency boost, dual exchange platform, high-quality cutting head, steel beam, and intelligent bus control system.
Continuous Operation
The exchange table design allows one table to cut while the other table is loaded or unloaded, minimizing production downtime.
Enhanced Safety
The full enclosure prevents direct exposure to hazardous laser beams and helps contain flying debris.
Higher Production Efficiency
Cutting and material handling happen at the same time, reducing waiting time and improving daily cutting capacity.
Reduced Labor Handling Time
Operators do not need to stop the machine frequently for loading and unloading, reducing manual handling time.
Machine Structure and Control Highlights
The exchange table laser cutting machine combines mechanical stability, cutting head precision, and intelligent control for high-efficiency sheet metal processing.
High-Quality Cutting Head
A reliable cutting head supports sharp, clean cuts, high precision, and consistent performance during intensive production.
Steel Beam Structure
A robust steel beam helps reduce vibration, improve stability, and maintain cutting accuracy during high-speed movement.
Intelligent Bus System
The bus system supports stable communication, easier deployment, simpler debugging, production safety, and rich control functions.
Precision Rack and Pinion
Precision rack and pinion transmission supports high-speed motion and stable positioning accuracy across the cutting area.
Exchange Table Laser Cutting Machine Model Specifications
The original model specification data is preserved below and formatted for easier buyer comparison.
| Item | 1530 | 2040 | 2060 | 2560 | 2580 | 25120 |
|---|---|---|---|---|---|---|
| Working Area | 1500 × 3000mm | 2000 × 4000mm | 2000 × 6000mm | 2500 × 6000mm | 2500 × 8000mm | 2500 × 12000mm |
| Machine Dimensions | 9000 × 4800 × 2200mm | 11000 × 6000 × 2200mm | 15000 × 6000 × 2200mm | 15500 × 7500 × 2500mm | 20000 × 7500 × 2500mm | 29000 × 9800 × 2400mm |
| Worktable | Sliding Exchange | Sliding Exchange | Sliding Exchange | Sliding Exchange | Sliding Exchange | Sliding Exchange |
| Max Running Speed | 140m/min | 140m/min | 140m/min | 140m/min | 140m/min | 140m/min |
| Max Acceleration | 1.5G | 1.5G | 1.5G | 1.5G | 1.5G | 1.5G |
| X/Y Positioning Accuracy | ±0.03mm/m | ±0.03mm/m | ±0.03mm/m | ±0.03mm/m | ±0.03mm/m | ±0.03mm/m |
| X/Y Repositioning Accuracy | ±0.02mm/m | ±0.02mm/m | ±0.02mm/m | ±0.02mm/m | ±0.02mm/m | ±0.02mm/m |
| Operating Voltage | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz |
| Laser Power Range | 1500W–30000W | 1500W–30000W | 1500W–30000W | 1500W–30000W | 1500W–30000W | 1500W–30000W |
| Machine Power Consumption | 8–20kW | 8–20kW | 8–20kW | 8–20kW | 8–20kW | 8–20kW |
| Operating Temperature | 0°C–40°C | 0°C–40°C | 0°C–40°C | 0°C–40°C | 0°C–40°C | 0°C–40°C |
| Operating Humidity | <90% | <90% | <90% | <90% | <90% | <90% |
| Transmission System | Precision rack & pinion | Precision rack & pinion | Precision rack & pinion | Precision rack & pinion | Precision rack & pinion | Precision rack & pinion |
Typical Applications
Exchange table fiber laser cutting machines are suitable for workshops that require precision cutting, safe operation, and continuous sheet metal production.
Exchange Table Laser Cutting Machine Selection Guide
The correct machine should be selected by sheet size, material, thickness, cutting speed, edge quality, automation level, and workshop layout.
| Requirement | Recommended Direction | Buyer Note |
|---|---|---|
| Standard sheet cutting | 1530 model | Suitable for 1500×3000mm sheet processing and general fabrication shops. |
| Medium-format production | 2040 / 2060 model | Useful when sheets are longer than standard 3m or when part nesting requires more cutting area. |
| Large plate cutting | 2560 / 2580 / 25120 model | Suitable for heavy fabrication, long plates, and large-format sheet processing. |
| Continuous batch production | Exchange table configuration | Reduces idle time because cutting and loading/unloading can occur at the same time. |
| Safety-sensitive workshop | Full enclosure design | Recommended where operator protection, fume containment, and cutting safety are important. |
| High-power cutting | Select laser power by material and thickness | 1500W–30000W range allows configuration for thin sheet speed or thicker plate cutting. |
Applicable Materials
Fiber laser cutting is commonly used for metal sheet processing. Final cutting thickness depends on laser power, assist gas, material grade, edge quality requirement, and production speed target.
What Information Should You Send for a Laser Cutting Machine Quote?
To recommend the right model and laser power, please provide sheet size, material, thickness, target cutting speed, production volume, and workshop voltage.
Material and Thickness
- Carbon steel, stainless steel, aluminum, brass, copper, or galvanized sheet
- Minimum and maximum thickness
- Most common daily cutting thickness
- Edge quality requirement
- Assist gas preference if known
Machine Requirement
- Working area: 1530, 2040, 2060, 2560, 2580, 25120, or custom
- Laser power: 1500W, 3000W, 6000W, 12000W, 20000W, 30000W, or not sure
- Full enclosure requirement
- Exchange table requirement
- Automatic loading/unloading requirement
Project Details
- Daily or monthly production volume
- Workshop space and machine layout requirement
- Voltage and frequency
- Need for fume extraction or safety enclosure
- Destination country and delivery term
Frequently Asked Questions
What is an exchange table laser cutting machine?
It is a fiber laser cutting machine with two worktables. One table cuts inside the machine while the other table is used for loading and unloading, reducing downtime and improving production efficiency.
Why choose a full enclosure design?
Full enclosure improves safety by containing the cutting process and helping protect operators from laser radiation, flying debris, sparks, and fumes.
What working areas are available?
The original page lists 1530, 2040, 2060, 2560, 2580, and 25120 models, covering working areas from 1500×3000mm to 2500×12000mm.
What laser power range is available?
The original specification lists laser power range as 1500W–30000W.
What information is needed for quotation?
Please provide material type, sheet size, thickness range, target production speed, required working area, laser power preference, voltage, workshop layout, destination country, and delivery term.
Need an Exchange Table Fiber Laser Cutting Machine for Continuous Sheet Metal Production?
Send HALDEN your material type, sheet size, thickness range, required cutting speed, laser power preference, workshop voltage, and production volume. We can help recommend a suitable exchange table laser cutting machine configuration.
Please include these details:
- Material type: carbon steel, stainless steel, aluminum, brass, copper, or galvanized sheet
- Sheet size and thickness range, including the most common daily cutting thickness
- Required working area: 1530, 2040, 2060, 2560, 2580, 25120, or custom
- Laser power preference or target cutting speed and edge quality requirement
- Need for full enclosure, exchange table, fume extraction, or automatic loading
- Voltage, workshop layout, destination country, and preferred delivery term
