Cement plant applications
Cement wear liners should be selected by material flow, particle size, impact level, temperature and installation method. HALDEN supplies flat plates, cut liners and fabricated assemblies for high-wear zones.
Send photos and drawing to match thickness, fixing method and replacement strategy.
Send photos and drawing to match thickness, fixing method and replacement strategy.
Send photos and drawing to match thickness, fixing method and replacement strategy.
Send photos and drawing to match thickness, fixing method and replacement strategy.
Material selection
| Wear condition | Recommended material | Why it works |
|---|---|---|
| Sliding abrasion in chutes | Chromium carbide overlay plate | Hard carbide-rich surface resists abrasive flow. |
| Fine dust erosion | Smooth CCO or AR steel | Smoother surface helps reduce material build-up and erosion points. |
| Impact plus abrasion | CCO liner with proper backing / AR plate | Backing and installation design help absorb impact. |
Specification entry
| Overlay thickness | Commonly 3-20 mm, selected by wear rate and replacement interval. |
|---|---|
| Base plate | Q235, Q345, A36 or project-specified backing material. |
| Hardness range | Typical chromium carbide overlay surface 58-65 HRC. |
| Fabrication | Cutting, bending, rolling, bolt holes, studs, welding and assembly by drawing. |
| Inquiry data | Drawing, dimensions, material handled, temperature, current lifetime and failure photos. |
Lifetime and cost logic
A cement liner should be evaluated by service life, shutdown frequency, replacement labor and tons processed between maintenance stops. HALDEN can compare the current liner life with a CCO or fabricated liner proposal when you provide operating history.
Send the worn liner drawing, photos and current lifetime. HALDEN will suggest material, thickness, fabrication method and packing for export quotation.
FAQ
What information is needed for a cement wear plate quote?
Drawing, dimensions, wear location, material flow, temperature, current lifetime, quantity and installation method.
Can HALDEN supply finished liners instead of flat plate?
Yes. HALDEN can cut, bend, drill, weld studs and fabricate liners according to drawings.
Which is better for cement chutes: CCO plate or AR steel?
CCO plate is often selected for severe sliding abrasion. AR steel may be used where impact, forming or smoother fabrication is more important. The best choice depends on the wear mechanism.
